Overview:

This product is a portable energy storage power system integrating multiple functional modes. It can be placed indoors or in a car, and can also be used as an outdoor emergency backup power supply. And according to different ways of use, solar energy or grid charging can be selected, and the output provides two different voltage modes of AC and DC to meet the needs of different electronic products. The system can provide two rated AC outputs of 110V or 220V, and is configured with various DC outputs such as 5V, 12V, PD3.0, etc. The system has a built-in lithium battery with strong output capacity, and is equipped with an advanced management system, which can ensure the long life of the battery and the safety of the use process.

Product Features:

1. Portable, mobile, easy to use.
2. Support multiple charging methods: 12-30V/5A slow charging (photovoltaic charging), 15A fast charging.
3. Support the function of DC charging and discharging at the same time.
4. AC 110V or 220V, DC 5V/12V and other voltage outputs.
5. High-performance, high-safety, high-power automotive power batteries.
6. Undervoltage, overcurrent, overtemperature, short circuit, overcharge, overdischarge and other system protection functions.
7. Support 380W fast charging interface.

Support QC3.0 fast charge output function.

1. Product function introduction

1. Charging: Equipped with 25.5V/15A fast charging Anderson interface, 12V 30V/5A wide voltage DC charging port.
2. AC discharge: long press the "AC button" for 3 seconds to turn on or off the AC function.
3. DC discharge: long press the "DC button" for 3 seconds, the LCD screen will display "OUT 12V USB 5V", and all DC output ports can be used normally, and long press for 3 seconds can turn off the DC output.
4. 0 port: It can charge devices that support QC fast charging.
5. Click the DC button to turn on the LCD screen to display power information. Automatically shut off after 10S.
6. When the power is displayed or AC and DC are turned on, double-click the DC button to turn on the LED lighting function, and double-click the DC button again to turn off the LED lighting function.
7. When the internal temperature of the AC output machine reaches 50°C, the cooling fan will automatically turn on.
8. After AC or DC output overload or short circuit protection, the corresponding display characters will flash and the buzzer will alarm.

2. Product main specifications

1. Input and output voltage and current

2. Dimension

3. Electrical Features
4. Input Features

2. Output Features

3. Protective Features

4. Use environment and precautions

1. When using this product, you must strictly follow the steps in the
2. For the heat dissipation space of the product, 5CM space is reserved around the product to allow heat dissipation and convection.
3. When the power of the product is insufficient, the load power exceeds the rated power or the ambient temperature is too high, the product will automatically start the protection function and turn off the output.
4. It is recommended to charge the energy storage system when there is no load.
5. This product contains high voltage electricity, do not disassemble the product privately to avoid safety accidents.
6. Leaving the power supply unused for a long time will cause the power supply itself to run out, please make sure to charge it every 6 months.
7. When using an AC load, the power provided by this product is the rated load power. Generally, AC loads with less than this power can be used normally, but the starting power of some electrical equipment is often greater than the rated power when starting up, such as the instantaneous power of motor equipment. It is several times the rated power. In addition, the starting power of energy-saving lamps is about dozens of times their rated power. If their starting power is greater than the peak power of our products, the over-in protection function of our products will be activated and the output will be automatically turned off.
8. It is forbidden to use this product in gasoline, gas and other flammable, explosive and corrosive gas environments.
9. If the product is accidentally infiltrated by water or other foreign substances, in order to ensure the safety of the product, please send it to the distribution office for inspection and treatment. If it is caused by abnormal use, the company will charge according to the actual situation.

5. Product Packaging Details